Български
Валута BGN
3D принтер Roland monFab ARM-10 buy in София on Български
Купувам 3D принтер Roland monFab ARM-10
3D принтер Roland monFab ARM-10

3D принтер Roland monFab ARM-10

Наличен
Посочете цена от продавача
Доставка:
Търговец
България, София
(виж на картата)
+359 
Да се покажат телефоните
Технически характеристики
  • БрендRoland DG
  • Страна производителЯпония
Описание

3D принтерът monoFab ARM-10 на Roland DG Corporation обединява 3D моделиращите технологии, в които Roland е пионер от 1986г.

ARM-10 е идеален за бърза проверка на дизайна още в начален етап на разработване или моделиране на сложни обекти. Начина на работа се базира на емитиране на ултравиолетова светлина от прожектор през леща, която втвърдява и структурира слой от светлочувствителна смола. Изготвеният продукт е полупрозрачен. По желание може да се извършат допълнителни процеси като полиране и боядисване.

MODEL

ARM-10

Build technology

Layer projection system

Build size

130 (W) x 70 (D) x 70 (H) mm (5.1 (W) x 2.7 (D) x 2.7 (H) inches)
(Job volume of resin is up to 300 g (0.7 lbs))

Build speed                   

 10mm/h (Layer pitch = 0.15mm)

Light source

UV-LED (ultraviolet light emitting diode)

XY resolution

0.2mm

Z axis resolution

0.01mm

Power requirements

Machine?DC 24V, 0.6A, Dedicated AC adapter: AC 100V to 240V±10%, 50/60Hz

Power consumption

15W

Acoustic noise level

During operation: 55dB (A) or less, During standby: 49dB (A) or less

Dimensions / Weight

430 (W) x 365 (D) x 450 (H) mm (17.0 (W) x 14.4 (D) x 17.8 (H) inches) / 17 kg (37.5lbs)

Interface

USB

Environment

During Operation: Temperature of 20 to 30°C, 68 to 86°F, 35 to 80% relative humidity (non-condensing)

Environment

Not operating: Temperature of 5 to 40°C, 41 to 95°F, 20 to 80% relative humidity (non-condensing)

Included Items

AC adapter, Power cable, USB cable, Liquid material vat, Printing and washing tools (Metallic spatula, Plastic spatula, Tweezers, Washing container x 2, Hexagonal wrench, Spanner, Rubber gloves, Work tray, etc.), Start-up page information card.

 

 
    System Requirements  

Operating system

Windows 7/8/8.1 (32-bit/64-bit edition)

CPU

Intel Core 2 Duo or more (Core i5 or more recommended)

RAM               

1GB (2GB or more recommended)

Video card and monitor

A resolution of 1,280 x 1,024 or more recommended

Free hard-disk space

100MB or more recommended

Other requirements

Internet connection and web browser,
Internet Explorer version 10 or more recommended

   
  Optionally Available Items    

Resin, 350g bottle

PRH35-ST 

Liquid material vat

LMV-10, For replacement

 

 

 Resin safety precautions before and after curing

The main intended purpose of PRH35-ST resin is design verification and prototyping applications.
Please refer to the published safety data sheets and the included user's manual for the handling of uncured resin. Although completely cured resin* is harmless when used for its main intended purpose, no biocompatibility assessment has been conducted. This resin is not suitable for applications where direct contact with food will occur or applications where extended contact with the skin or human body will occur.
* Completely cured resin: Refers to the state where curing reaction has occurred to the point that uncured reactive components have been eliminated.
Контакт с продавача
3D принтер Roland monFab ARM-10
3D принтер Roland monFab ARM-10
Shipping method
Сравнете0
ИзтрийтеИзбрани са позициите: 0